New MTR Updates

MTR Custom Leather is always changing weekly. So check out this category and stay up to date with us. This is the best way to keep up with us!

Instead of buying a new belt, you can just have MTR resize your current MTR belt. Whether it’s a gun belt, dress belt or casual belt. We are here to solve your belt issue.

Website Update:
Now available on our site (click the link below)
Have an MTR belt and need to make it smaller? Did you lose some weight? Congratulations! Instead of buying a new belt, you can just have MTR resize your current MTR belt. Whether it’s a gun belt, dress belt or casual belt. We are here to solve your belt issue.

In order to have your current belt resize you must be on the last hole near the buckle and be loose. To resize a belt, there’s a minimum of 3″ to be taken off. WHY? 

Process of resizing your belt: 

We will take cut off the leather near the buckle to make the belt shorter, that way when the belt is shorten it looks like new. We do not add more holes unless you request it. Once the leather has been taken off; we will then re-sewn the leather, re-wax, re-edge, re-buff, apply a flexible leather wax for protection of the leather, then put the hardware back onto the belt. Finally, you got a new belt on the way to you!

How to measure for your NEW belt: 

Take a ruler and measure from the buckle end where the leather folds over the buckle to the hole that you currently wear it in to the nearest inch. On your new belt there will be 6 holes for adjustment–two holes (2 inches), then the center hole, and 3 holes forward (3 inches). If you are going to wear IWB holster, measure the belt with the holster and the gun for accurate belt measurement.

Resize Your MTR Belt — MTR Custom Leather

Halloween is around the corner… Can you find the missing holster?

Try to find the missing holster in the pumpkin patch! Comment if you found it.

MTR Custom Leather holsters for the AREX Defense Weapons: Rex Zero 1 CP, Rex Zero 1 S, Rex Zero 1 T & Rex Zero 1 TC

We got holsters for the AREX Defense Weapons: Rex Zero 1 CP, Rex Zero 1 S, Rex Zero 1 T & Rex Zero 1 TC with suppressor sights, threaded barrel and red dot capability.

A promo video for Rex Zero 1, a new handgun produced by Arex. The handgun is DA/SA with short trigger reset and clean brake, has a full chamber indicator, decocker and features ambidextrous magazine release and safety.

THE AREX ZERO 1 CP DOES NOT CLAIM TO BE A REVOLUTIONARY BREAKTHROUGH BUT YOU WILL FIND IT REPRESENTS A DEFINITIVE EVOLUTIONARY STEP IN MODERN HANDGUN DESIGN AND MANUFACTURING. WE HAVE ACHIEVED IMPROVEMENTS OVER SOME OF THE MOST POPULAR DESIGNS, ILLUMINATING THE WEAKNESSES AND ENHANCING THEIR ADVANTAGES BY APPLYING OUR EXPERTISE AND STATE OF THE ART CARDS/CAM PROCESSES. THE RESULT IS A BEST IN CLASS DEFENSIVE PISTOL THAT BOTH EXTREME RELIABILITY AND ACCURACY ALONG WITH A COMPETITIVE PRICE

AREX Zero 1 S – AREX

Beretta M9A4, FN 502 Tactical Custom Made Leather Holsters Available

We got holsters for the NEW Beretta M9A4! Several times choose from IWB, OWB, Shoulder rigs, ankle rigs, thigh rigs and even POCKET HOLSTERS…. 😹

More New weapons and light/laser attachment for leather holsters and accessories

Forgot to mention a few more weapons and light/laser attachments.

Ruger Max 9

M&P Shield 9 Plus

Sig Sauer P365XL with Lima Laser

Stream light TLR-10

Stream light TLR-9 Flex

Stream light TLR-7 Sub

All Olight models (baldr, mini, tactical, Valkyrie,pro, Pl series and more)

New Weapons for Leather Holsters.. STI Staccato, Ruger, Springfield and More

We got a lot of new weapons and lasers in. Get your leather holsters and accessories now for them.

FN 502

Ruger LCP MAX

STI Staccato- P

STI Staccato- C

Taurus GX4

Wilson Combat SFX9 and all the EDC models with or w/o compensator and red dot

Springfield Armory Emissary

+ More

August 2021 Updates with MTR Custom Leather

WE WILL HAVE A NRA SHOW SPECIAL SALE SOONNew Weapons Available for Holsters Walther PPK/S, Wilson Combat Protector, Ruger Mark IV Target 5.5″ & Taurus GX4New Light/Laser Attachments for Holsters Streamlight TLR-7 sub, TLR-9 Flex, TLR-10 and Olight Baldr RLNEW ALLIGATOR GUN BELTS NOW AVAILABLENEW LEATHER>COGNA TIGER SHARKPocket CarryCLICK HERE YouTubeWe now offer an EXPEDITE service. From 12-20 weeks to 2-3 WEEKS!Peace Maker (Leather Knuckles)WHEN YOU PLACE YOUR ORDER, CREATE AN ACCOUNT OR LOG INTO YOUR EXISTING ACCOUNTA FEW CUSTOM PROJECTSQUESTION:
How to tailor a shoulder rig?About:
MTR​ ​Custom​ ​Leather​ ​shoulder​ ​rigs​ ​not​ ​only​ ​profound​ ​in concealment,​ ​function​ ​and​ ​comfort,​ ​they​ ​also accommodate​ ​changes​ ​in​ ​the​ ​user’s​ ​carrying​ ​routine.​ ​You can​ ​purchase​ ​individual​ ​horizontal​ ​or​ ​vertical​ ​shoulder holsters​ ​only​ ​to​ ​accommodate​ ​different​ ​handguns.​ ​A second​ ​holster​ ​of​ ​your​ ​choice​ ​can​ ​be​ ​added​ ​to​ ​the​ ​same shoulder​ ​rig​ ​to​ ​create​ ​a​ ​OO7​ ​rig.​ ​All​ ​shoulder​ ​rigs​ ​comes with​ ​one​ ​holster,​ ​one​ ​double​ ​ammo​ ​pouch​ ​and​ ​ties​ ​for each. 
 
Assembly:Verify​ ​contents​ ​of​ ​bag.​ ​Each​ ​shoulder​ ​rig​ ​should include:​ ​one​ ​holster,​ ​one​ ​double​ ​ammo​ ​pouch with​ ​tie​ ​downs​ ​on​ ​each. Check​ ​fit​ ​of​ ​your​ ​gun​ ​and ammo​ ​pouch,​ ​then​ ​break-in asneeded.​ ​Please​ ​follow​ ​the instructions​ ​on​ ​the​ ​back​ ​of your​ ​thank​ ​you​ ​letter​ ​for​ ​a guide​ ​to​ ​break​ ​in​ ​your​ ​leather goods. 
 
Tie-Downs: 
​ ​Tie-downs​ ​are​ ​designed​ ​to​ ​anchor​ ​the​ ​shoulder​ ​rig components​ ​to​ ​your​ ​gun​ ​belt.​ ​Tie-downs​ ​are​ ​optional items​ ​and​ ​are​ ​used​ ​as​ ​a​ ​matter​ ​of​ ​personal​ ​preference. You​ ​can​ ​take​ ​on​ ​the​ ​attached​ ​tie​ ​downs​ ​by​ ​easily un-snapping​ ​the​ ​directional​ ​military​ ​snap​ ​(Refer​ ​to​ ​small instruction​ ​sheet​ ​on​ ​how​ ​to​ ​work​ ​the​ ​military​ ​directional snap). Tie-downs​ ​to​ ​connect​ ​ammo​ pouch​​ ​to​ ​gun​ ​belt Tie-downs ​ ​to​ ​connect​ ​holster​ ​to​ ​gun​ ​belt Tie-downs​ ​allows​ ​for​ ​the​ ​harness ​to​​ ​stay​ ​in​ ​place when​ ​in movement.  
Instructions: Put​ ​your​ ​empty shoulder​ ​rig​ ​on like​ ​you​ ​would​ ​a coat​ ​or,​ ​some​ ​prefer​ ​to​ ​put​ ​it​ ​on​ ​over​ ​there​ ​head like​ ​a​ ​t-shirt.​ ​The​ ​flexible​ ​swivel​ ​base​ ​plate located​ ​on​ ​the​ ​back​ ​of​ ​the​ ​shoulder​ ​rig​ ​with​ ​4 screws​ ​should​ ​be​ ​centered​ ​between​ ​yourshoulders​ ​blades​ ​below​ ​the​ ​base​ ​of​ ​the​ ​neck. Make​ ​sure​ ​that​ ​the​ ​natural​ ​color​ ​side​ ​of​ ​the shoulder​ ​rig​ ​is​ ​against​ ​the​ ​body​ ​and​ ​the​ ​smooth color​ ​side​ ​is​ ​facing​ ​the​ ​outside.​ ​This​ ​will​ ​allow friction​ ​and​ ​stability​ ​of​ ​the​ ​shoulder​ ​rig​ ​on​ ​your clothing.​ ​Also,​ ​sweating​ ​or​ ​body​ ​oils​ ​will​ ​not affect​ ​the​ ​natural​ ​backing.​ ​It​ ​will​ ​actually​ ​allow for​ ​a​ ​more​ ​comfortable​ ​feeling. Insert​ ​the​ ​unloaded​ ​handgun​ ​and magazine/speed​ ​loaders​ ​in​ ​there​ ​pouch. Adjust​ ​the​ ​ride​ ​height​ ​and ​cant​​ ​position​ ​of​ ​the holster​ ​and​ ​ammo pouch​ ​to​ ​the​ ​most concealable​ ​and comfortable​ ​fit​ ​for​ ​your body​ ​type.​ ​This​ ​adjusting process​ ​of​ ​the​ ​shoulder​ ​rig​ ​is​ ​critical;​ ​spend​ ​the time​ ​to​ ​get​ ​the​ ​correct​ ​correct​ ​fit.​ ​A​ ​rig​ ​that​ ​is​ ​set up​ ​in​ ​a​ ​hurried​ ​fashion​ ​results​ ​in​ ​a​ ​sloppy​ ​fit​ ​and compromised​ ​function.​ ​Many​ ​users​ ​find​ ​it​ ​easier to​ ​have​ ​another​ ​person​ ​adjust​ ​the​ ​shoulder​ ​rig for​ ​them​ ​while​ ​they​ ​remain​ ​stationary.​ ​This​ ​can be​ ​done​ ​by​ ​adjusting​ ​the​ ​screws​ ​on​ ​the​ ​each strap​ ​of​ ​the​ ​rig.​ ​Adjusting​ ​the​ ​the​ ​holster​ ​and ammo​ ​pouch​ ​consist​ ​of​ ​2​ ​straps​ ​each.​ ​To​ ​angle the​ ​rig,​ ​one​ ​strap​ ​may​ ​be​ ​higher​ ​than​ ​the​ ​other strap. Once​ ​it’s​ ​fitted​ ​correctly,​ ​remove​ ​shoulder​ ​rig carefully,​ ​trying​ ​to​ ​not​ ​alter​ ​the​ ​adjustments. Secure​ ​all​ ​hardware​ ​in​ ​place.​ ​Ensure​ ​that​ ​all screws​ ​are​ ​tighten​ ​snugly.​ ​Applying​ ​a​ ​small amount​ ​of​ ​clear​ ​fingernail​ ​polish​ ​to​ ​the​ ​threads will​ ​minimize​ ​screw​ ​back-out. Put​ ​shoulder​ ​rig​ ​back​ ​on​ ​and​ ​recheck​ ​all adjustments. When​ ​you​ ​are​ ​absolutely​ ​certain​ ​of​ ​all adjustments​ ​you​ ​may​ ​trim​ ​off​ ​excess​ ​leather straps​ ​length.​ ​Please​ ​consider​ ​the​ ​following:It​ ​often​ ​may​ ​require​ ​wearing ​the​​ ​shoulder​ ​rig​ ​for several​ ​days​ ​before​ ​fine​ ​tuning​ ​is​ ​complete.Before​ ​permanently​ ​shortening​ ​the​ ​rig,​ ​keep​ ​in mind​ ​future​ ​use​ ​with​ ​seasonal​ ​clothing,​ ​body armor,​ ​weight​ ​fluctuations,​ ​etc. 
How-To Video- “CLICK to WATCH:THERE IS STILL SO MUCH TO TELL YOU THAT HAS HAPPEN, SO WE DID NOT WANT THIS NEWSLETTER TO BE SUPPER LONG, THEREFORE LOOK FORWARD TO ANOTHER NEWSLETTER UPDATE COMMING SOON! CHECK OUT OUR BLOG PAGE AND FAQ PAGE FOR SOME HANDY TIPSNext Gun Show will be in CHANTILLY, VA
“THE NATIONS GUN SHOW” on OCT 1-3, 2021

**view our show calendar on this link**AND NOW….FINALLY WHAT YOU HAVE BEEN WAITING FOR A COUPON…THANK YOU FOR SUBSCRIPING TO OUR NEWSLETTER AND BEING A PART THE MTR TEAM. Coupon Code: AUGUPDATEFSFREE SHIPPING ON YOUR ORDER
Expires: 2021-08-29Buy Now
Customer Service:

em: sales@mtrcustomleather.com
ph: (336) 879-2166 or (336) 879-2767

visit our site for a fast response with ANNA in our LIVECHAT experience 

Check out our sister site:

www.southernedc.com 

Check out our EBAY Store: 
https://www.ebay.com/usr/mtrcustomleather

After Hours:
Feel free to google message us or facebook message us 


Want to change how you receive these emails?
You can update your preferences or unsubscribe from this list.

Copyright © *|2021|* *|MTR Custom Leather, LLC|*, All rights reserved.
 

Happy July 4th Everyone- Protect your Animals- July 4th Pet Safety Tips- Keep the animals Safe!

Happy July 4th Everyone! We hope you all enjoy a safe day filled with lots family fun times! Be blessed for Today because we are not promised tomorrow! GOD is good all the time, all the time GOD is good! #july4th #mtrcl

MTR Custom Leather-July 4th SALE Starts NOW! SAVE! Use Coupon Code in BLOG

HAPPY JULY 4TH YA’LL!!

FROM: MTR CUSTOM LEATHERYour friends at MTR Custom Leather, LLC want to help you celebrate this Independence Day in fine style. Just for the Fourth of July, we’re rolling out a few specials! Don’t forget to checkout our up to date inventory in stock items on our Quick Ship category. We will be closed July 5th, 2021! However, our website and live chat is 24/7! 

 Buy NowSTAY TUNED FOR SOME EXCITING UPDATES IN A FEW WEEKS>>> NEW WEAPONS>>NEW PACKAGES>>>WEBSITE UPDATES>> NEW EXOTIC LEATHER>>GUN SHOW UPDATE>>MUCH MORE!!
CHECK OUT OUR MTR BLOG PAGE TO LEARN MORE ABOUT NEW WEAPONS, ATTACHMENTS, HOLSTERS, GUN NEWS, ETC!BLOG NOWNEXT GUN SHOW>>>
CHANTILLY VA “NATION’S GUN SHOW” JULY 23-25, 2021Copyright © *2021* *MTR Custom Leather, LLC*, All rights reserved.


Customer Service:
em: sales@mtrcustomleather.com
ph: (336) 879-2166 or (336) 879-2767
visit our site for a fast response with our LIVECHAT experience 

Check out our sister site: www.southernedc.com 

After Hours:
Feel free to google message us or facebook message us 
Scroll to top