Instead of buying a new belt, you can just have MTR resize your current MTR belt. Whether it’s a gun belt, dress belt or casual belt. We are here to solve your belt issue.
Website Update:
Now available on our site (click the link below)
Have an MTR belt and need to make it smaller? Did you lose some weight? Congratulations! Instead of buying a new belt, you can just have MTR resize your current MTR belt. Whether it’s a gun belt, dress belt or casual belt. We are here to solve your belt issue.
In order to have your current belt resize you must be on the last hole near the buckle and be loose. To resize a belt, there’s a minimum of 3″ to be taken off. WHY?
Process of resizing your belt:
We will take cut off the leather near the buckle to make the belt shorter, that way when the belt is shorten it looks like new. We do not add more holes unless you request it. Once the leather has been taken off; we will then re-sewn the leather, re-wax, re-edge, re-buff, apply a flexible leather wax for protection of the leather, then put the hardware back onto the belt. Finally, you got a new belt on the way to you!
How to measure for your NEW belt:
Take a ruler and measure from the buckle end where the leather folds over the buckle to the hole that you currently wear it in to the nearest inch. On your new belt there will be 6 holes for adjustment–two holes (2 inches), then the center hole, and 3 holes forward (3 inches). If you are going to wear IWB holster, measure the belt with the holster and the gun for accurate belt measurement.
NEW Beretta M9A4 Optics Ready Pistol
Beretta has just released their latest version of the famous 92 series, the Beretta M9A4, which comes as an improvement over the M9A3. The primary difference between the A3 to the M9A4 is the addition of factory optics cuts on the top of the pistol’s slide, which was previously only achieved via aftermarket services or products. Beretta’s M9A4 webpage states that there are five different optics mounting plates available, and at the time of this publishing, Beretta stated that M9A4 buyers can get an optics plate for free upon registering their pistol.
BERETTA M9A4 SPECIFICATIONS:
The following is from Beretta’s website:
Aside from the new optics ready feature, the M9A4 uses the “Vertec” grip angle which is narrower front to back than the original Beretta 92 style. It will also be available with 10, 15, or 18 round magazines. The M9A4 will come with the “G” style decocker-only lever as opposed to having a manual safety and decocker combination. The M9A4’s MSRP is listed at $1099.00, but as of yet, no mention of how much the additional optics plates will cost outside of users getting one free when registering with Beretta. You can view the product page HERE, or visit Beretta.com to see all of their products. You can also follow them on Facebook, Instagram and YouTube.
NEED A GOOD HAND MADE LEATHER HOLSTER FOR THIS BERETTA.
WWW.MTRCUSTOMLEATHER.COM
YOU WILL FIND THE WEAPON LISTED UNDER EVERY HOLSTER!