Blog

Hellcat™ Series | Springfield Armory

October 16, 2019 by MTR Custom Leather in Uncategorized with 1 Comment

After years of development, we are proud to introduce the Hellcat™, the highest capacity micro compact 9mm in the world and the next generation of defensive pistol from Springfield Armory.

The 3″ barreled micro compact pistol features a class leading capacity of 11+1 with its patented magazine — 13+1 with the included extended mag — and is the result of years of painstaking development and engineering in addition to intensive collaboration with top engineers, shooters and self defense experts.

In addition to minute dimensions and stunning capacity, the Hellcat offers a paradigm shifting approach to red dot sight integration for an EDC pistol. Offered in an Optical Sight Pistol configuration, the Hellcat OSP features a seamless cover plate that removes to allow direct mounting of a micro red dot to the slide for the lowest possible profile. The result? A micro sized pistol weighing in at a mere 17.9 oz. with capabilities previously reserved only for full size defensive handguns.

HELLCAT™ 3″ MICRO-COMPACT OSP™ 9MM

Source: Hellcat™ Series | Springfield Armory

Comparing Ulticlips – UltiClip

October 8, 2019 by MTR Custom Leather in Uncategorized with No Comments

Source: Comparing Ulticlips – UltiClip

How To Dye Leather

October 7, 2019 by MTR Custom Leather in Dye Leather with No Comments

A Step-by-Step Guide for Leather Dyeing on Natural Leather

The process for leather dyeing is almost a standard process, anyway it can change in some steps depending on the type of leather dye you’re going to use. To get a quality high-end finish on your natural leather, there are different approaches, especially between water-based leather dyes and alcohol-based leather dyes.

This step-by-step guide will reveal you some tips that will help you get a high-end finish with good color consistency, uniform coating and a smooth surface.

STEP 1:

Pour the paint into a flat container

Water-based leather dye is a liquid with high viscosity, so for a more comfortable use of the paint, we suggest to drop it into a flat container such as a plastic dish or the lid of a bucket. Drop the leather dye into the container and wear gloves before you start the leather dyeing process.

STEP 2:

Apply leather dye with a circular movement

To proceed with the leather dye hand application you can use a sponge, a dauber or a soft cloth. Dip your tool into the paint and start applying it on the natural leather surface with circular movements. During the first application you’ll immediately notice that the paint is quickly absorbed by the leather. You should continue to apply it on the whole leather surface until it will appear completely colored with a uniform coating.

STEP 3:

Let it dry and see the color changing

As you’re using a water-based product the drying phase will be slower that alcohol or solvent-based paint. It should take around 5 to 10 minutes and during this phase you’ll see the color on your leather surface changing and becoming more clear and more bright.

STEP 4:

Repeat the dyeing application by using less quantity

Once the first coat is completely dried you can proceed with the second application. This phase is not strictly necessary but is strongly recommended to give your color more consistency and to have a uniform coating on your leather surface. During the second application you may notice that the paint has more difficulty to penetrate the leather, because a good part is already full of paint.

STEP 5:

Remove the paint in excess before it dries

The paint that is not immediately absorbed by the leather could remain on the leather surface as liquid stripes. It’s very important to remove it before it dries otherwise your leather will not have a uniform aspect. To remove the paint in excess you can easily use the dry part of your sponge or a clean cloth.

STEP 6 (optional):

Use the fixative for extra-bond color

Depending on the type of natural leather you’re using, color may have different bonding. That’s why if you need the color to be well bonded to the leather surface, you can use the leather fixative as final coat.

Source: How To Dye Leather

10 Questions about Top Grain Leather

October 7, 2019 by MTR Custom Leather in Uncategorized with No Comments

Top grain leather is one of the main leather grades. We have collected 10 of the most common questions about this Top Grain Leather.

1 – What is top grain leather?

Top grain leather is the second highest grade of leather. It has a uniform finish and is thinner and more workable than full grain leather, but it does not have its strength or durability.

2 – What does top grain leather look like?

The imperfections which occur naturally in full grain leather have been sanded away and the top

grain leather is imprinted with a regular imitation grain. The result is a smooth, uniformly patterned surface.

3 – Where does top grain leather come from?

There are 3 possible answers:

Where in the world does top grain leather come from?

The top six leather producing countries in the world are: China, India, Italy, Brazil, Korea and Russia. China produces 80% of the world’s leather.

Which animals are used in the production of leather?

Most leather is made from cows, because of their availability, their size and the quality of the leather. Leather can also be made from pigs, sheep, deer and horses. Small quantities of exotic leathers like a alligators, snakes, frogs and sting-rays.

>Where on the hide does top grain leather come from?

As its name suggests, top grain leather comes from the top of the hide, but several millimeters have been removed from the surface in order to eliminate imperfections.

4 – How is top grain leather made?

Several millimeters from the surface of the hide are sanded away, the leather is then buffed to create a smooth, blemish free surface.

5 – How to protect top grain leather

Top grain leather will have an aniline dye or a semi aniline dye. The leather should be nourished every three months, depending on the type of item and its usage.

You can also use a leather Conditioner, like the one we have in our stock, to give some more softness and care to the leather surface.

Disclaimer: You should always test any new products on a small inconspicuous area of the leather first, before applying all over, to ensure you are happy with any changes that may occur to the appearance and texture.

6 – How long will top grain leather lasts?

The life of your top grain leather will depend on the initial quality of the hide, the type of product and its usage and care. Obviously a Full grain leather will lasts longer, but top grain leather will last for a quite while too.

7 – How thick is top grain leather?

The thickness of an animal hide will depend on the type of animal. A cow hide, the most likely choice for top grain leather, is about 3/64^thof an inch thick, the thickness of a coin.

8 – Can top grain leather peel?

Top grain leather which has a semi aniline dye and protective coating will peel over time.

9 – Can top grain leather be bonded?

Bonded leather is the lowest quality leather which is made by gluing scraps of leather together in the way that chipboard is made from scraps of wood. Top grain leather is not bonded, it is the top layer of the hide which has had surface imperfections removed.

10 – Common uses of top grain leather<

Top grain leather is soft and attractive and most of the common items we know are made with top grain leather.

Source: 10 Questions about Top Grain Leather

Leather Holsters Care and Maintenance

October 3, 2019 by MTR Custom Leather in Leather Care with 1 Comment

LEATHER CLEANING

Wipe down your leather products with a clean dry cloth after every use. A gentle cleansing with warm water and glycerin soap can be done if the leather becomes soiled. Brush on with a soft-bristled toothbrush, rinse and pad the leather with a dry cloth until it remains just slightly damp. Allow the product to air dry the rest of the way.

LEATHER STORAGE

When not in regular use, store your leather products in a cool, dry location. They can be wrapped in a soft cotton cloth and stored in their own box or hard case where you might keep clothing or important documents. Cool and dry is ideal. If you leave your handgun in the holster or other product, check it daily for moisture, condensation or corrosion. And remember to take your leather holster out of storage periodically to check its condition, wipe it down and remove any dust.

ADDITIONAL LEATHER TIPS

In addition to your regular cleaning routine, these tips will help you care for your leather products.

Use leather conditioners sparingly. Leather conditioners are specially formulated to loosen and moisturize leather as needed. Because MTR Custom leather is hand finished with our special leather dressing, should your leather product become dry or scratched, you can treat the exterior with a commercial leather dressing that does not contain lacquer. (Be careful when using Neat’s foot oil; large amounts will soften the leather.)

Protect leather from perspiration. Placing a barrier such as a t-shirt, coat or the waistband of your pants between your skin and your holster will ensure your leather holster is protected.

Treat the interior of your holster with spray silicone to help protect against excess moisture. Spray silicone also speeds the draw by reducing friction.

If your product becomes water-soaked, reshape it as best you can and allow it to air-dry at room temperature. Do not use a hot oven – it will shrink, harden and crack the leather.

Brass cartridges or other brass hardware when stored with leather will acquire a greenish residue called “verdigris.“ It is a natural product of a chemical reaction between brass and vegetable-tanned leather, and it wipes off.

To keep your leather goods in the best condition and allow them to age naturally and gracefully, avoid the following:

High humidity. Humidity can cause your leather product to mildew over time.

Direct sunlight and high heat. Direct sunlight and high heat can cause your leather holster and other products to become brittle and dry, and could cause the material to crack or fade. Changing atmospheric conditions, heavy perspiration and other factors could create such conditions.

Storing your leather goods in the trunk of your car, shed, garage or attic where heat or vermin/pests could be a factor.

Saddle soap or other conditions that could over soften the leather.

Areas of high salt content/sweat can degrade the leather quality.

MTR Custom leather holsters are available in a wide variety of types

Source: Leather Holsters Care and Maintenance

CHECK out our NEW and UPDATED Exotic Leather for Holsters and Accessories-Hipo, Giraffe, Caiman… FAQS — MTR Custom Leather

July 30, 2019 by MTR Custom Leather in Uncategorized with No Comments

MTR offers a wide selection of exotic leather. These leathers varies weekly. As we get in different exotic leather every week, that may not be listed below. Each exotic leather can vary in colors and what we are able to make with it. Some exotic leather only comes in small panels and can only be crafted in small items and goods. For additional questions about our exotic leather, please call (336) 879-2166 or email us at sales@mtrcustomleather.com.

Source: FAQS — MTR Custom Leather

SIG Sauer P365XL | Concealed Carry-Custom Leather Holsters for the Sig P365XL-Made in USA-CHECK OUT THE SPECS

July 16, 2019 by MTR Custom Leather in Uncategorized with 20 Comments

Keep in mind that MTR Custom Leather, LLC offers several styles of holsters including: outside the waistband crossdraw, paddle holsters, belt slides and inside the waistband holster that are tuckable. MTR is a well know top custom holster manufacture that specializes in custom made holster to the specific weapons with after market attachments. Another great feature of MTR, they offered the BEST prices on exotic leather including tiger shark, elephant, stingray, alligator and many others. Check them out at www.mtrcustomleather.com *Updated July 8th, 2019* It’s official, Sig Sauer just sent out a press release announcing that their much anticipated 365XL is available for purchase in stores. You can find more about them on SIG’s website or you may be able to find them for purchase at Brownells. This is a highly anticipated release from SIG, who continually thinks outside the box to bring customers exactly what they want. I know many of us carry a P365 for everyday carry, and I have formally requested a 365XL to review from SIG Sauer. I’ll keep you posted on when/if I get it

Source: SIG Sauer P365XL | Concealed Carry Inc

GRIPSENSE- LASERMAX GS-LTN-R- We have leather holsters-IWB, OWB, Shoulder Rigs and Much More…CHECK THIS OUT…

July 15, 2019 by MTR Custom Leather in Uncategorized with No Comments

GripSense represents the newest generation of laser activation technology by simplifying the activation process. The user simply grips the firearm, setting off a motion sensor once in the detection zone, which then activates the laser immediately and does not require the user to change their firing grip. Additionally, the Lightning with GripSense Activation Technology includes some significant innovations including a fully programmable operating mode, and up to twenty hours of continuous battery life- safeguarded from inadvertent drain by a ten-minute time out feature. The Lightning will come in Vivid Red or Daytime Green, green being the most visible color to the human eye.

GripSense Activation senses the users grip within the detection zone and activates the sight
Dual activation capable with either GripSense or controlled push button
Does not alter your shooting grip
Easily programmable for steady or high-vis pulsed beam
External Battery access hatch with tool-less entry
Water resistant design
5 year warranty

Keep in mind that MTR Custom Leather, LLC offers several styles of holsters including: outside the waistband crossdraw, paddle holsters, belt slides and inside the waistband holster that are tuckable. MTR is a well know top custom holster manufacture that specializes in custom made holster to the specific weapons with after market attachments. Another great feature of MTR, they offered the BEST prices on exotic leather including tiger shark, elephant, stingray, alligator and many others. Check them out at www.mtrcustomleather.com

Source: GRIPSENSE

Coverage and Protection of your weapon in a holster-FAQS — MTR Custom Leather

May 31, 2019 by MTR Custom Leather in Uncategorized with 1 Comment

MTR Custom Leather, LLC designs holsters for a wide range of materials, shapes, retention, from simple leather pouches hanging from a belt to highly protective holsters with flaps that cover the entire handgun, to highly adjustable competition holsters that hold the handgun at a precise position and release instantly when activated. The wide range of types indicates the highly varied circumstances in which holsters are used, and the varying preferences of the customers.

The function of MTR holsters is to hold and restrict the undesired movement of the weapon, most commonly in a location where it can be easily withdrawn for immediate use. (We do not recommend the upside down shaking method for the weapon’s retention in the holster). Holsters vary in the degree to which they secure or protect the weapon. The need for ready access is often at odds with the need for security and protection, so the customer must consider their own preference.

Choosing the right balance can be very important, especially in the case of a defensive weapon holster, where failure to access the weapon quickly or damage or loss of the weapon due to insufficient retention or protection could result in serious injury or death to the customer. With this being said, MTR covers the TRIGGER on ALL holsters, unless otherwise specified. If you would like your full trigger guard of your weapon covered, please specify by a phone call (336) 879-2166, email (sales@mtrcustomleather.com), comment on order or our live chat. If there is any other additional coverage that you would like on your holster for your personal preference of protection or safety of your weapon, please inform us.

Disclaimer Information

Safely Handling Rules (one example) Every customer needs to be trained by a professional on there weapon and use all safety regulations dealing with weapons.

Source: FAQS — MTR Custom Leather

Welcome to MTR Custom Leather’s Blog.

A Step-by-Step Guide for Leather Dyeing on Natural Leather

STEP 1:

Pour the paint into a flat container

STEP 2:

Apply leather dye with a circular movement

STEP 3:

Let it dry and see the color changing

STEP 4:

Repeat the dyeing application by using less quantity

STEP 5:

Remove the paint in excess before it dries

STEP 6 (optional):

Use the fixative for extra-bond color

LEATHER CLEANING

LEATHER STORAGE

ADDITIONAL LEATHER TIPS

Made with ultra-high quality nylon (1080D) with antique muted copper buckle and hardware for a vintage look. B-31 Kodiak Standard (formerly Yukon Standard) is now updated to include a single-pocket front to accommodate larger phones.

Optional detachable holster system available – 100% Vegetable tan leather holster allows for custom positioning and a super quick-draw application or a universal leather holster

Features Velcro on the front for patches to personalize

Additional large top, front pocket, and side-stow pockets for flashlight, folding knife, calls, extra mags, etc.

Recent Posts

Recent Comments

Archives

Categories

Meta

Archives

Top Rated Products

Top Rated Products

Cart

Products