Don’t forget to give us a google, facebook and website review!
Google:
https://search.google.com/local/posts?q=MTR+Custom+Leather,+LLC&ludocid=13297256045488592463&lpsid=7502129063003111833
Facebook:
MTR Website:Â
Holster Reviews
This category focuses on reviews for holsters. Advantages, disadvantages, types, styles, ways to carry and etc. Check out the reviews on holsters before purchasing yours.
MTR Custom Leather, LLC – YouTube – YouTube
Have you subscribe to our youtube channel? If not your missing out. Check out over 85 videos about MTR Custom Leather. If you have videos of our holsters in action, than please share them to us.
S.O.B. (small of the back) Defense (A-1B) Instructions
Pix 1: Front View on a belt                                                     Pix 2: Back View
DESCRIPTION:
The S.O.B. Defense Holster is your new and modern small of the back carry holster. This holster is very compact and is angled for a fast draw in times of emergency. This holster is meant to be worn in the small of the back outside of the pants palm in. The S.O.B. Defense holster has a reinforced leather mouth to help retain the holster opening for easy re-holstering.
The S.O.B. Defense holster comes with a retention screw underneath the trigger guard, and when needed it can be tightened up for a tighter retention for your holster. As you can see, this holster is hand-boned to the weapon of choice. The purpose of hand-boning is to show off the fine detail of the weapon on the holster, and most importantly to give a glove-tight fit when inserting your weapon. The main focus when making this holster was safety, gun retention, and comfort. The belt slots can fit up to 1-1/2 gun belt (2 layers 1-1/4 thick) or 1-3/4 regular belt (1 layer web belt).
INSTRUCTIONS:
The pictures shown above are a right handed holster. The handle of the weapon should be facing towards your shooting hand. The barrel of your weapon should be facing away from your shooting hand. (Refer to picture 1). Keep in mind the holster is meant to be drawn palm in. Meaning the palm of your hand will be facing your body when drawing. On the S.O.B. defense holster, there are 2 belt slots to run your belt through. (Refer to picture 2).
How to change your A-2 Dual Purpose (Carry) holster from IWB to OWB?
 Front IWB View                  Front View OWB View                      Back View Â
This holster gives you the best of both worlds by offering an inside the waistband (IWB) holster that converts to outside the waistband (OWB) by easily taking off our USA powder coated holster clips. When removed they reveal our molded belts slots for our famous close riding pancake. This holster has become one of our top sellers due to the versatility of having both IWB and OWB capabilities. It’s best to leave the hardware on, once the clips are off. This will help cover the stud that’s embedded into the leather and also prevent you from losing the hardware.
All of our A-2 holster has a custom combat cut for each weapon, this will aid in a faster draw of the weapon. You will also notice that we use heavy duty nylon industrial strength thread to endure great stress on the holster for long term. Don’t forget to checkout our professional slick edges. We use two pieces of leather to construct the holster’s foundation. With our profession slicking technique we conform the two edges into one single slick edge.
Each A-2 is molded specifically to each weapon of choice to sustain a great glove fit retention and detail in the holster. We only use the finest bull hide and hardware on this holster to ensure the longevity and durable wear for years to come. We reinforce the mouth for easy one handed re-holstering and to prevent collapsing while carrying IWB.
This holster by far is a great wearing holster both OWB and IWB. The A-2 is tuckable, so you can tuck your shirt behind the metal clips. The holster clips/belt slots can fit up to 1-1/2 gun belt(2 layer) or 1-3/4 regular belt (1 layer). If you do a loose tuck than the shirt can come back over the metal clips to conceal them.
You can also upgrade to the NEW UltiClips3 to give you better concealment of the clips. Adding the ulticlips will give you the adjustability to position your clips for the perfect draw. Whether it be ride height or adjusting the cant of the holster. With the ulticlips you do not have to wear a belt. You can easily clamp the clips straight onto the pants or any material. Keep in mind if you are going to wear a belt, it will aid in better retention of the holster. Make sure it’s a good stiff heavy gun belt like our GB-1 gun belt.
www.mtrcustomleather.com * (336) 879-2166 * sales@mtrcustomleather.com
MTR Custom Leather Shoulder Rig Instructions –Â
About:
MTR Custom Leather shoulder rigs not only profound in concealment, function and comfort, they also accommodate changes in the user’s carrying routine. You can purchase individual horizontal or vertical shoulder holsters only to accommodate different handguns. A second holster of your choice can be added to the same shoulder rig to create a OO7 rig. All shoulder rigs comes with one holster, one double ammo pouch and ties for each.
Assembly:
- Verify contents of bag. Each shoulder rig should include: one holster, one double ammo pouch with tie downs on each.
- Check fit of your gun and ammo pouch, then break-in as needed. Please follow the instructions on the back of your thank you letter for a guide to break in your leather goods.
Tie-Downs:
Tie-downs are designed to anchor the shoulder rig components to your gun belt. Tie-downs are optional items and are used as a matter of personal preference. You can take on the attached tie downs by easily un-snapping the directional military snap (Refer to small instruction sheet on how to work the military directional snap).
- Tie-downs to connect ammo pouch to gun belt
- Tie-downs to connect holster to gun belt
- Tie-downs allows for the harness to stay in place when in movement.
Instructions:
- Put your empty shoulder rig on like you would a coat or, some prefer to put it on over there head like a t-shirt. The flexible swivel base plate located on the back of the shoulder rig with 4 screws should be centered between your shoulders blades below the base of the neck. Make sure that the natural color side of the shoulder rig is against the body and the smooth color side is facing the outside. This will allow friction and stability of the shoulder rig on your clothing. Also, sweating or body oils will not affect the natural backing. It will actually allow for a more comfortable feeling.
- Insert the unloaded handgun and magazine/speed loaders in there pouch.
- Adjust the ride height and cant position of the holster and ammo pouch to the most concealable and comfortable fit for your body type. This adjusting process of the shoulder rig is critical; spend the time to get the correct correct fit. A rig that is set up in a hurried fashion results in a sloppy fit and compromised function. Many users find it easier to have another person adjust the shoulder rig for them while they remain stationary. This can be done by adjusting the screws on the each strap of the rig. Adjusting the the holster and ammo pouch consist of 2 straps each. To angle the rig, one strap may be higher than the other strap.
- Once it’s fitted correctly, remove shoulder rig carefully, trying to not alter the adjustments.
- Secure all hardware in place. Ensure that all screws are tighten snugly. Applying a small amount of clear fingernail polish to the threads will minimize screw back-out.
- Put shoulder rig back on and recheck all adjustments.
- When you are absolutely certain of all adjustments you may trim off excess leather straps length. Please consider the following:
- It often may require wearing the shoulder rig for several days before fine tuning is complete.
- Before permanently shortening the rig, keep in mind future use with seasonal clothing, body armor, weight fluctuations, etc.
 Â
What kind of holster should I get if I don’t wear a belt?
What kind of holster should I get if I don’t wear a belt?Â
          
Tactical Paddle Bundle (SP-5)
MTR Custom Leather recommends our A-8, A-8A, A-8B, A-8C or one of our package deals that includes a paddle holster like: SP-5 and SP-12. CHECK THEM ALL OUT ON OUR WEBSITE UNDER OUTSIDE THE WAISTBAND HOLSTERS.
The A-8 Paddle Holster was designed for those seeking an easier on/off outside the waistband holster.
– Can Be Worn In 3 Different Configurations: Straight Draw, Forward Cant, or 15o Reverse Cant
– Full Sweat Shield To Help Protect You From The Sharp Edges Of The Gun As Well As Protecting Your Weapon From Body Oils and Sweat
– Reinforced Mouth For Easy Re-holstering
– Full Barrel Coverage That Conceals The Entire Barrel
– Can Be Worn With or Without A Belt, Which Is Ideal For Women That Do Not Wear Belts
– Easy On/Off Capability
– Gun Specific
**Not recommended for heavy weapons. The holster may want to lean forward. Check out a holster with 2 attachments to the belt for closer ride and better concealment.
***Keep in mind this is a plastic paddle not leather. The back of the paddle is super smooth and contours to the body well.
NOTE: DUE TO THE FACT THAT OUR GEAR IS ADJUSTABLE THREAD LOCKER IS NOT APPLIED DURING THE PRODUCTION PHASE. PLEASE ARRANGE YOUR GEAR HOWEVER YOU AND YOUR APPLICATION DESIRE AND APPLY A BLUE THREAD LOCKER TO YOUR HARDWARE. LOST HARDWARE WILL BE REPLACED AT THE CUSTOMERS EXPENSE.
PRODUCT INFORMATION GUIDE
ADJUSTABLE PADDLE HOLSTER
The MTR Paddle Holster can be adjusted for a variety of carry angles, enabling extremely comfortable wear and easy customization to every body type and method of draw. Whether your choice is butt-forward (forward cant) or barrel-forward cant (cross draw), or neutral cant (vertical) all by using a phillips head screwdriver to adjust the MTR Paddle.
- HOW THE HOLSTER WILL BE SET UP, BOTH SCREWS ON THE TOP HOLES
- BARREL FORWARD FOR CROSS DRAW CARRY, RIGHT SCREW IS LOWER THAN THE LEFT SCREW FOR A RIGHT HAND SHOOTER (GREAT FOR RIDING/DRIVING IN A VEHICLE)
- BOTH SCREWS ARE ON LOWER HOLES, FOR A HIGHER RIDING HOLSTER
- Â BUTT FORWARD (HANDLE FORWARD) FOR RIGHT HAND SHOOTER, RIGHT SCREW IS HIGHER THAN THE LEFT SCREW
HudsonMfg New Weapon H9 in our NEW A-5V Deluxe Full Size VERTICAL Quick Snap HolsterÂ
The NEW A-5V Vertical Draw Deluxe Full-Size Quick-Snap holster is hand crafted with double military directional steel snaps on each leather strap for double the security. Features about the A-5V: leather reinforced mouth piece to help retain the holster opening for easy re-holstering. Sweat shield or body shield is a key feature to help protect you from the sharp edges on the weapon; while also protecting the weapon from your body oils and sweat. The New Vertical Draw Deluxe Full-Size Quick-Snap fully conceals the full length of the weapon while carrying OWB. Each holster comes with a deep mold of the outlines of the specific firearm, which is only done by a technique called hand boning. This technique is created by one of our professional leather craftsman to ensure a proper fitment of the weapon for long term use.
https://www.mtrcustomleather.com/product/vertical-draw-deluxe-quick-snap-holster-5v/Â
https://www.instagram.com/p/BaXMl0LBiaQ/?taken-by=hudson_mfg
MTR Custom Leather Offers VIRIDIAN ENHANCED COMBAT READINESS (ECR)
When you draw, it’s on
Threat can arise in an instant. You can react just as fast. The split-second you draw, Viridian’s Enhanced Combat Readiness system ignites the brilliant green laser and/or taclight — targeting, blinding, intimidating in one reflex-fast move. Suddenly you’ve got the advantage.
With Enhanced Combat Readiness (ECR) now part of every universal Viridian laser, you can achieve inhumanly fast response to crisis. Just pre-set the Viridian laser/taclight mode, slide your gun into your TacLoc holster, and the ECR system is armed and ready. The instant gun leaves holster, the laser fires a brilliant beam that cuts through daylight or darkness as fast as you can draw.
With virtually unlimited laser and/or taclight modes and the breakthrough ECR system, Viridian has elevated combat readiness to a whole new level. Draw-and-activate is obsolete. Partner up with ECR and get the drop on evil.
The Viridian C Series, X Series (excluding RS), and REACTOR Series are equipped with ECR technology and activate when drawn from our MTR Custom Leather holsters.
Please use the following guidelines to determine if your current Viridian laser sight is equipped with ECR technology:
- C5 units with serial numbers beginning at or higher than C019860.
- C5L units with serial numbers beginning at or higher than C018000.
- X5L (Gen 2) units with serial numbers beginning at or higher than X002830.
Check out MTRCustomLeather.com to choose and design your ECR Instant on Holster. The ECR instant on option is only compatible for viridian lasers only. If you would like to purchase a viridian laser give us a call at (336)879-2166.
- ‹ Previous
- 1
- 2
- 3
Recent Comments