Shop

Customizability is our top priority.

Product removed from wishlist!

Vertical Draw Deluxe Quick-Snap Holster (A-5V)

(4 customer reviews) 4 reviews Add your review

The matriarch of the A-5 Deluxe Fullsize Quicksnap has finally arrived. You asked for and here it is. None other like this holster before. Hudson Manufacturer tested and approved of this holster.

Features:

 

  • Double layer reinforced mouth piece provides easy eyes off reholstering

  • Custom cut and molded body shield or sweat shield to protect you from the sharp edges of the weapon

  • Custom Hand-Molded to each firearm of choice for better retention

  • Full Combat grip accessibility allows an instant shooting grip

  • Molded sight rail to prevent snags on draw

  • Full slide/barrel coverage

  • Vertical draw to allow the fastest, wrist-lock draw stroke

  • Wide platform to enable contouring of the holster for better concealment

  • Fits belts up to 1 3/4″ single layer or nylon belts

$79.99

Gun Make & Model (A-E) (1911’s)

You will find only manufactures that start with the letter A-E in this box. If you do not see your manufacture listed that starts with the letters A-E, than please contact us through email or phone. We get new manufactures weapons in daily. You can reach us at (336)879-2166 or sales@mtrcustomleather.com.

Gun Make & Model (F-J)

You will find only manufactures that start with the letter F-J in this box. If you do not see your manufacture listed that starts with the letters F-J, than please contact us through email or phone. We get new manufactures weapons in daily. You can reach us at (336)879-2166 or sales@mtrcustomleather.com.

Gun Make & Model (K-O)

You will find only manufactures that start with the letter K-O in this box. If you do not see your manufacture listed that starts with the letters K-O, than please contact us through email or phone. We get new manufactures weapons in daily. You can reach us at (336)879-2166 or sales@mtrcustomleather.com.

Gun Make & Model (P-R)

You will find only manufactures that start with the letters P-R in this box. If you do not see your manufacture listed that starts with the letters P-R, then please contact us through email or phone. We get new manufactures weapons in daily. You can reach us at (336)879-2166 or sales@mtrcustomleather.com.

Gun Make & Model (“S”)

You will find only manufactures that start with the letter “S” in this box. If you do not see your manufacture listed that starts with the letter”S”, then please contact us through email or phone. We get new manufactures weapons in daily. You can reach us at (336)879-2166 or sales@mtrcustomleather.com.

Gun Make & Model (T-Z)

You will find only manufactures that start with the letter T-Z in this box. If you do not see your manufacture listed that starts with the letter T-Z, then please contact us through email or phone. We get new manufactures weapons in daily. You can reach us at (336)879-2166 or sales@mtrcustomleather.com.

Attachment (Laser Light)

Any holster purchased from MTR Custom Leather, LLC with a light/laser attachment on the weapon, may automatically come with an enclosed sewn bottom even if you choose open. However, if you definitely want an enclosed bottom please choose enclosed end under “Holster End” option. MTR Custom Leather, LLC takes into consideration that over time leather as we all know will stretch. Therefore, the retention of the holster may decrease. Having a laser/light attachment on the weapon will increase the weight of the weapon causing a decrease in the retention of the holster faster, than a weapon without a laser/light attachment. MTR Custom Leather, LLC adds an enclosed sewn bottom to most holsters, to ensure a long term use of the holster at no extra cost to you. Some lasers and light attachments causes the holster to become “boxy” in shape, due to the attachment is under the trigger guard. Weapons without an attachment, is held into the holster by the retention of the trigger guard angle (“L” shape). MTR has figured this out in the many years of constructing leather holsters with laser attachments. We want the best functional and safe holster for you for your protection. If you do not see your laser/light/optic listed please call (336)879-2166 or email sales@mtrcustomleather.com to see if we have it.

RMR/Red Dot Sight/Aftermarket Sights

**What is a red dot sight? Type of non-magnifying reflector (or reflex) sight for firearms, and other devices that require aiming, that gives the user an aimpoint in the form of an illuminated red dot.
**FAQ: If your Gun Make & Model option has the weapon and RMR together (ie: Sig Sauer P320 Full Size RX) please choose NO, so you do not get charged twice for the same attachment.
**Please type the Red Dot that you below
**If you have any aftermarket sights (night sights, suppressor sights, big dot sights) higher sights than normal, than please choose “YES” and specify your make and model
**Please keep in mind that once the order is received, the manufactures will check over the order to make sure all the options that you choose will function properly when manufacturing. Some options may not work properly when manufactured. This is something that we may not know until the holster is being built.

Grip Laser

If your laser is a grip laser and mounted on the grip of the weapon than please choose “YES” and specify your make and model of your laser.

ECR Instant On Viridaian Lasers

Enhanced Combat Readiness (ECR) now part of every universal Viridian laser. This can only be used with the Viridian C Series, X Series Gen 2 and Gen 3, and Reactor Series are equipped with INSTANT-ON technology and activate. Please see FAQ page and our BLOG page for more info. Will not work on E-series.

Shooting Hand *

Color *

Check out our FAQ page for a chart of the color selection. Also, check out our gun belts for the color.

Stitching Color

Wanna spice up your holster a little, or have a different holster than anyone else? Make the holster unique and custom by adding some color stitching to the front of the holster only. Each color is made with heavy duty nylon thread, to resist easy tearing or dry rot damage. We are unable to do color thread on mahogany colored items only black thread for mahogany colored items.

Stitching

Double stitching is a second line of stitching. This will aid is better retention and long term use of the holster.

Thumb Break

On large DA (double action) weapons the thumb break is placed decocked. Smaller SA/DA (single action/double action) weapons the thumb break is placed cocked and locked. If you would like your thumb break placed differently, then please add that in the comment section. If you order a holster with a thumb break there is no returns or exchanges or refunds under any condition.

Holster End

The holster end means that the barrel of your weapon will be cover, but you have the option to having the holster end sewn at the bottom or leaving it open. This is a preference of choice. Leaving the holster end open is good for target shooting. This will allow for debris to exit the barrel of the weapon after shooting a lot. Flip side, if carry the weapon in a pouch or outdoors (riding a horse, bike, hunting, etc), one may want to enclose the bottom. So debris will not enter the barrel of the weapon. Keep in mind, that if you have a laser or light attachment, than the bottom of the holster may be enclosed (Please see FAQ page for more information).

Internal Liner

When we craft a holster we use the smooth bull hide leather on the outside and the ruffer portion on the inside. When someone adds a liner we add a second layer of thinner bullhide leather and use the smooth side inside the holster with the two ruff sides against each other. This process is to enable is a smooth drawing of the weapon, instead of suede having some friction when drawing. Secondly, suede tends to not mold as easy on the inside as the bullhide, enabling less retention. The bullhide leather molds with great detail and definition in the leather. The bullhide leather is not as thick as the suede causing better concealment of the holster when wearing.

Exotic Leather

Choosing exotic leather will increase the strength and durability of the holster. . The exotic leathers listed below is some of the strongest leathers available! The texture is much more defined than the others leathers. Exotic leather is a dense material that helps resist moisture and scratch proof. Well worth every penny! Learn more about the function, texture and colors on our FAQ page. One of our most expensive leathers available is alligator, please call for prices and colors available.

Share:
SKU: A-5V Category: Tags: , , , , , , , ,

The NEW Vertical Draw Deluxe Full-Size Quick-Snap holster is hand crafted with double military directional steel snaps on each leather strap for double the security. Features about the A-5V: leather reinforced mouth piece to help retain the holster opening for easy re-holstering. Sweat shield or body shield is a key feature to help protect you from the sharp edges on the weapon; while also protecting the weapon from your body oils and sweat. The New Vertical Draw Deluxe Full-Size Quick-Snap fully conceals the full length of the weapon while carrying OWB. Each holster comes with a deep mold of the outlines of the specific firearm, which is only done by a technique called hand boning. This technique is created by one of our professional leather craftsman to ensure a proper fitment of the weapon for long term use.

The A-5V Vertical Deluxe Full-Size Quick-Snap is a major step up from our original design B-3 and B-4. This is the 4rd generation of this type of holster from us. This gives each generation of holsters a major difference in function, features and feel. One of the main differences between the A-5 and A-5V, is the A-5V Vertical Draw Deluxe Full-Size Quick-Snap holster has no cant (15 degrees) to the weapon. The holster will be positioned straight up for a vertical draw, similar to our B-3 and B-4 holster.  The A-5V  features a slight wider profile in width to enable a nice comfortable contouring of the holster to the body just like the A-5. This will create the weapon and holster to stay concealed against the body. The profile of the holster will be less noticeable under a shirt.

FYI: The straps may be turned in the opposite direction, by using a screw driver to undue each snap from the strap. This will give you the option to unsnap the strap by pushing from the top of the strap or by pulling the strap from the bottom.  Choose which way works best for you; it’s a preference of choice.

Keep in mind the leather belt loops/straps can fit up to 1-1/2 gun belt (2 layer ¼” thick) or 1-3/4 regular belt (1 layer thinner belt).

**The additional picture provided is one of our most popular selling holsters. It’s mahogany color with tiger shark trim.

NOTE: DUE TO THE FACT THAT OUR STRAPS ARE INTERCHANGABLE, THREAD LOCKER IS NOT APPLIED DURING THE PRODUCTION PHASE.  PLEASE APPLY A BLUE THREAD LOCKER TO YOUR HARDWARE. LOST HARDWARE WILL BE REPLACED AT THE CUSTOMERS EXPENSE.

Weight1 lbs
Shooting Hand

, ,

Color

, , , , ,

Stitching Color

, , , , , , ,

Holster End

, ,

Exotic Leather

, , , , , , , , , , , , , , , , , , , , ,

Stitching

, ,

4 reviews for Vertical Draw Deluxe Quick-Snap Holster (A-5V)

  1. Phillip M. (verified owner) –

    Verified reviewVerified review - view originalExternal link

    Quality is excellent. Only thing is I’m not too fond of having 2 snaps, have to fiddle some, but overall I’m very pleased.

  2. Tom G. (verified owner) –

    Verified reviewVerified review - view originalExternal link

    I have purchased several holsters from MTR and always have been pleased with quality of the product.

  3. Brand John Brand (verified owner) –

    Verified reviewVerified review - view originalExternal link

    Excellent material, fit and craftsmanship.

  4. John Brand (verified owner) –

    Verified reviewVerified review - view originalExternal link

    Awesome equipment.

Add a review

Related Products

Scroll to top