The 92 Elite LTT with a low mount Red Dot Optic Cut Slide (Full Size, Centurion, or Compact)

After years of development, Langdon Tactical is very proud and excited to introduce a Micro Red Dot capable Beretta 92. This has been no easy task as the internal workings of the 92 slide have made the “proper” low mounting of a red dot optic impossible. With the design of 5 new components and a custom mounting plate specific for the Beretta 92, Langdon Tactical can properly low mount a micro red dot optic.

When we say low, we mean very low: Our system has a dot height above the center of the bore of .85″ (when paired with a Trijicon RMR), which is as low or lower than most direct milled striker-fired systems.

A re-engineered firing pin and firing pin block permits the super-secure mounting of an adapter plate that is held in place with three mounting screws, a front dovetail, and a center indexing boss milled into the slide. This plate has a built-in back-up rear sight that mates up with a newly designed front sight for the Elite LTT and other Vertec type slides. This new system is a game-changer for the Beretta 92 owners. The LTT RDO Solution for the Beretta 92 Series of pistols is currently Patent Pending.

All RDO pistols come with a red dot height front sight, our proprietary adapter plate with built in rear sight installed, an optimized performance trigger bar, a 13# hammer spring, and the LTT Trigger Job.
All RDO guns are ‘G-model’/decock only. The 92 Elite LTT ships with (3) 18 rd magazines. The Carry Bevel Model includes the NP3 parts and trigger job.

**An RDO/Optic sight is NOT INCLUDED in this package** The screws included in the package are (2) Holosun to plate 4 x 40 5/16 and (2) RMR to plate 4 x 40 3/8. TORC Spec: 10 inch pounds.

California: these firearms are not on the CA roster.

LEAD TIMES: PLEASE BEAR WITH US as we work through orders and catch up!

• Full Size 92 Elite LTT with RDO &
  • Trigger Job: 2-4 weeks
  • NP3: 4-8 Weeks
  • Carry Bevel: 6-8 Weeks
• Compact 92 Elite LTT with RDO &
  • Trigger Job: 2-4 weeks
  • NP3: 4-8 Weeks
  • Carry Bevel: 6-8 Weeks
• Centurion 92 Elite LTT with RDO &
  • Trigger Job: 4-6 weeks
  • NP3: 4-8 weeks
  • Carry Bevel: 4-8 weeks

We appreciate your patience – thank you so much for continuing to support Team LTT!

FAQ’s: 

Q: What is the cowitness of the RDO BUIS?

A: The LTT RDO included front & rear BUIS is a lower-1/3rd cowitness.

Q: What red dot optics are supported by the LTT RDO solution?

Our RMR Plate fits:

• Trijicon RMR
• Trijicon SRO
• Holosun HS407C
• Holosun HS507C
• Holosun HS508T
• Riton X3 Tactix PRD
• NcStar VISM FlipDot Pro
• Swampfox Kingslayer

Our Doctor Plate fits:

• Docter/Noblex Sight C
• Docter/Noblex sight 2+
• Docter/Noblex sight III
• Docter/Noblex QUICKsight 5.0 VR
• Noblex Sight G
• Vortex Venom
• Burris Fastfire 2*
• Burris Fastfire 3*
• Delta Optical MiniDot*
• Delta Optical MiniDot II*
• Hawke Reflex 1×25*
• Sightmark Mini Shot Pro Spec*
• Sightmark Mini Shot M-Spec
• Leica Tempus
• MAKdot 1×25
• Vomz Pilad 1×20

Our Shield/Delta Plate fits (no rear sight):

• Leupold Delta Point Pro
• Sig Sauer Romeo 2

Our HE509T Plate fits:

• Holoson HE509T

Looking to upgrade your existing 92?
Grab a new Elite LTT RDO Slide  or Upgrade your existing slide with our RDO Solution 

CHECK OUT THE NEW LTT GEAR HERE, including RDO holster, hat and t-shirts!

See the videos page for videos from the range, shop, drop test and drop test after thoughts

Still have questions? Check our Frequently Asked Questions (FAQ) page for more information!

New to purchasing a firearm online, or unfamiliar with the process? Please see our Firearms Purchase Policy prior to checking out.

LOOKING FOR A CUSTOM HOLSTER FOR YOUR BERETTA, WE GOT YOU!

CLICK ON THE LINK, CHOOSE YOUR HOLSTER AND START DESIGNING YOUR HOLSTER TODAY!

WWW.MTRCUSTOMLEATHER.COM