Shop

Customizability is our top priority.

Product removed from wishlist!

Avenger Scabbard Holster (A-4)

(34 customer reviews) 34 reviews Add your review

***The smallest OWB concealment holster available on the market

Features:

  • Covers the full-length barrel and trigger of the weapon

  • Double layer reinforced mouthpiece provides easy eyes off re-holstering

  • Custom Hand-Molded to each firearm of choice

    for better retention

  • Full Combat grip accessibility allows an instant shooting grip

  • Molded sight rail to prevent snags on draw

  • Slight forward cant to allow the fastest, wrist-lock draw stroke (YOU CAN CHOOSE YOUR CANT POSITION)

  • 2 Sewn belt loops one on the back and one beside the trigger guard for better concealment, security and draw

$79.99

Gun Make & Model (A-E) (1911’s)

You will find only manufactures that start with the letter A-E in this box. If you do not see your manufacture listed that starts with the letters A-E, than please contact us through email or phone. We get new manufactures weapons in daily. You can reach us at (336)879-2166 or sales@mtrcustomleather.com.

Gun Make & Model (F-J)

You will find only manufactures that start with the letter F-J in this box. If you do not see your manufacture listed that starts with the letters F-J, than please contact us through email or phone. We get new manufactures weapons in daily. You can reach us at (336)879-2166 or sales@mtrcustomleather.com.

Gun Make & Model (K-O)

You will find only manufactures that start with the letter K-O in this box. If you do not see your manufacture listed that starts with the letters K-O, than please contact us through email or phone. We get new manufactures weapons in daily. You can reach us at (336)879-2166 or sales@mtrcustomleather.com.

Gun Make & Model (P-R)

You will find only manufactures that start with the letters P-R in this box. If you do not see your manufacture listed that starts with the letters P-R, then please contact us through email or phone. We get new manufactures weapons in daily. You can reach us at (336)879-2166 or sales@mtrcustomleather.com.

Gun Make & Model (“S”)

You will find only manufactures that start with the letter “S” in this box. If you do not see your manufacture listed that starts with the letter “S”, then please contact us through email. Please indicate your exact make and model of your weapon (especially revolvers) at checkout in the comment box.

Gun Make & Model (T-Z)

You will find only manufactures that start with the letter T-Z in this box. If you do not see your manufacture listed that starts with the letter T-Z, then please contact us through email or phone. We get new manufactures weapons in daily. You can reach us at (336)879-2166 or sales@mtrcustomleather.com.

Attachment (Laser Light)

When you come to checkout there will be a comment box, there you can type your exact make and model of your laser if it’s red or green laser etc. Also, if your weapon has different keys (like on a picatinny rail) that the laser/light can slide onto please let us know and send us a picture through email sales@mtrcustomleather.com

Threaded Barrel/Red Dot Sight/Aftermarket Sights

**What is a red dot sight? Type of non-magnifying reflector (or reflex) sight for firearms, and other devices that require aiming, that gives the user an aimpoint in the form of an illuminated red dot.
**FAQ: If your Gun Make & Model option has the weapon and RMR together (ie: Sig Sauer P320 Full Size RX) please choose NO, so you do not get charged twice for the same attachment.
**Please type the Red Dot that you below
**If you have any aftermarket sights (night sights, suppressor sights, big dot sights) higher sights than normal, than please choose “YES” and specify your make and model
**Please keep in mind that once the order is received, the manufactures will check over the order to make sure all the options that you choose will function properly when manufacturing. Some options may not work properly when manufactured. This is something that we may not know until the holster is being built.

Grip Laser

If your laser is a grip laser and mounted on the grip of the weapon than please choose “YES” and specify your make and model of your laser.

ECR Instant On Viridian Lasers

Enhanced Combat Readiness (ECR) now part of every universal Viridian laser. This can only be used with the Viridian C Series, X Series Gen 2 and Gen 3, and Reactor Series are equipped with INSTANT-ON technology and activate. Please see FAQ page and our BLOG page for more info. Will not work on E-series.

Shooting Hand * 

Color * 

Stitching Color

Wanna spice up your holster a little, or have a different holster than anyone else? Make the holster unique and custom by adding some color stitching to the front of the holster only. Each color is made with heavy duty nylon thread, to resist easy tearing or dry rot damage. (Color Thread $15.99-Black Free) The option that you choose will be shown at the very bottom before you add to cart.

Stitching

Double stitching is a second line of stitching. This will aid in better retention and long term use of the holster. (extra $15.99)

Sweat Shield * 

Holster Cant Position * 

Holster cant is the angle at which the gun rides in the holster. A gun that is carried vertically in the holster has a zero degree of cant and is in a neutral or “straight-drop” position. Forward/Positive/Standard cant would have the gun carried with a tilt forward, such as the FBI cant. An FBI cant is usually between 10 or 20 degrees, most commonly 15 degrees forward.

Thumb Break (Safety Strap)

Internal Liner

When we craft a holster we use the smooth bull hide leather on the outside and the ruffer portion on the inside. When someone adds a liner we add a second layer of thinner bullhide leather and use the smooth side inside the holster with the two ruff sides against each other. This process is to enable is a smooth drawing of the weapon, instead of suede having some friction when drawing. Secondly, suede tends to not mold as easy on the inside as the bullhide, enabling less retention. The bullhide leather molds with great detail and definition in the leather. The bullhide leather is not as thick as the suede causing better concealment of the holster when wearing.

Holster End

The holster end means that the barrel of your weapon will be cover, but you have the option to having the holster end sewn at the bottom or leaving it open. This is a preference of choice. Leaving the holster end open is good for target shooting. This will allow for debris to exit the barrel of the weapon after shooting a lot. Flip side, if carry the weapon in a pouch or outdoors (riding a horse, bike, hunting, etc.), one may want to enclose the bottom. So debris will not enter the barrel of the weapon. (Please see FAQ page for more information).

Exotic Leather

Choosing exotic leather will increase the strength and durability of the holster. . The exotic leathers listed below is some of the strongest leathers available! The texture is much more defined than the others leathers. Exotic leather is a dense material that helps resist moisture and scratch proof. Well worth every penny! Learn more about the function, texture and colors on our FAQ & BLOG page. One of our most expensive leathers available is alligator, please call for prices and colors available.

Share:

The Avenger Scabbard holster is one of the oldest styles of holsters out on the market today. A very popular holster design allows the person to carry OWB with full coverage of the barrel and take up less belt space as a traditional belt slide pancake holster. The Avenger Scabbard holsters still have two points of contact with a belt loop sewn on the back and a tight-fitting belt slot outside the trigger guard of the holster. This holster has a reinforced mouth for easy re-holstering, as well as a very durable loop on the back for long term use. We use heavy black nylon thread to sew close to the shape of the weapon, to help prevent stretching. The Avenger Scabbard holster fully conceals the weapon, preventing damage to barrel and internal parts of the weapon. The belt slots on the Avenger Scabbard can fit up to 1-1/2 gunbelt (2 layer) or 1-3/4 regular belt (1 layer).

**Picture shown with double stitching, which can be added for an additional cost.

***Keep in mind that each holster may look different due to the firearm that you choose. Revolvers and semi-automatics will have a different look and pattern. Especially, if one has a light/laser/optic will alter the pattern. Extra options that you choose will also make the holster look different than the picture, but only to function and wear best to the weapon and options that you choose!

Weight 1 lbs
Shooting Hand

, ,

Color

, , , , ,

Stitching Color

, , , , , , ,

Holster End

, ,

Thumb Break

, ,

Exotic Leather

, , , , , , , , , , , , , , , ,

Sweat Shield

, ,

Stitching

, ,

34 reviews for Avenger Scabbard Holster (A-4)

  1. Bruce S. (verified owner)

    I have purchased several holsters and belts from MTR. In each instance the item was exactly as ordered, and, given the custom nature of what they do, delivered in a timely manner. In this case, the Avenger Scabbard holster is perfectly molded to my LCP Max with laser. Leather is beautiful and finely crafted. A bit pricey, but if you want exactly what you want, get it at MTR.

  2. Brent Ryan (verified owner)

    I have 3 of these holsters from you for a Beretta LTT compact,a CZ PCR,and now a 365.I also have another holster from you for my CZ P-10c.All are excellent fit and a-1quality.You are my holster “go to”

  3. Lynn (verified owner)

    Very pleased with this MTR product.
    The ‘Avenger’ style quality leather holster is my decided go-to design after a few decades of CC, for work, OD, and now even in retirement.
    I was sourcing such a holster for a S&W M39 – a long discontinued 9mm pistol. That usually means there are no ‘normal’ sources, as they don’t regularly build holsters for discontinued pistols. I was trying to stay within a certain price-point, but still wanted a level of quality.

    Saw a reference to MTR on the S&W Forum, and member there stated he’d had great experience with MTR and had their ‘Avenger’ for his M39.
    Ordered it from MTR, finding it was made here in my home state of NC! Delivery time same as above, which is fine.
    On arrival, fitment was very good. Stitching and overall quality was noted as very good for the price-point. No – the leather is not what you’d find on a $100+ custom holster, but again – very good value for the money.
    Lesson I should have known – for good holsters stay with ‘Made in USA’.

  4. Gregory Glass (verified owner)

    great holster as always

  5. Donald B. (verified owner)

Add a review

Cancel

You may also like…

Scroll to top