Shop

Customizability is our top priority.

Product removed from wishlist!

Front Pocket Holster (B-7)

(7 customer reviews) 7 reviews Add your review

Front Pocket Holster (B-7) is a very simple yet effective holster for carry of small .380, 9mm and a small snub nose .38/.357. The front pocket design is small sleeve that encases the barrel and trigger guard of the weapon. Allowing easy access to the weapon.

The front pocket holster keeps the weapon upright in the pocket. To access the gun easier and prevent the gun from moving around. While keeping the holster and weapon comfortable in the pocket for long term carry!

This is also, a great choice for cargo pocket, jacket pocket, purse pocket, vehicle pocket or bedside.

$44.99

Gun Make & Model (A-E) (1911’s)

You will find only manufactures that start with the letter A-E in this box. If you do not see your manufacture listed that starts with the letters A-E, than please contact us through email or phone. We get new manufactures weapons in daily. You can reach us at (336)879-2166 or sales@mtrcustomleather.com.

Gun Make & Model (F-J)

You will find only manufactures that start with the letter F-J in this box. If you do not see your manufacture listed that starts with the letters F-J, than please contact us through email or phone. We get new manufactures weapons in daily. You can reach us at (336)879-2166 or sales@mtrcustomleather.com.

Gun Make & Model (K-O)

You will find only manufactures that start with the letter K-O in this box. If you do not see your manufacture listed that starts with the letters K-O, than please contact us through email or phone. We get new manufactures weapons in daily. You can reach us at (336)879-2166 or sales@mtrcustomleather.com.

Gun Make & Model (P-R)

You will find only manufactures that start with the letters P-R in this box. If you do not see your manufacture listed that starts with the letters P-R, then please contact us through email or phone. We get new manufactures weapons in daily. You can reach us at (336)879-2166 or sales@mtrcustomleather.com.

Gun Make & Model (“S”)

You will find only manufactures that start with the letter “S” in this box. If you do not see your manufacture listed that starts with the letter “S”, then please contact us through email. Please indicate your exact make and model of your weapon (especially revolvers) at checkout in the comment box.

Gun Make & Model (T-Z)

You will find only manufactures that start with the letter T-Z in this box. If you do not see your manufacture listed that starts with the letter T-Z, then please contact us through email or phone. We get new manufactures weapons in daily. You can reach us at (336)879-2166 or sales@mtrcustomleather.com.

Attachment (Laser Light)

When you come to checkout there will be a comment box, there you can type your exact make and model of your laser if it’s red or green laser etc. Also, if your weapon has different keys (like on a picatinny rail) that the laser/light can slide onto please let us know and send us a picture through email sales@mtrcustomleather.com

Threaded Barrel/Red Dot Sight/Aftermarket Sights

**What is a red dot sight? Type of non-magnifying reflector (or reflex) sight for firearms, and other devices that require aiming, that gives the user an aimpoint in the form of an illuminated red dot.
**FAQ: If your Gun Make & Model option has the weapon and RMR together (ie: Sig Sauer P320 Full Size RX) please choose NO, so you do not get charged twice for the same attachment.
**Please type the Red Dot that you below
**If you have any aftermarket sights (night sights, suppressor sights, big dot sights) higher sights than normal, than please choose “YES” and specify your make and model
**Please keep in mind that once the order is received, the manufactures will check over the order to make sure all the options that you choose will function properly when manufacturing. Some options may not work properly when manufactured. This is something that we may not know until the holster is being built.

Grip Laser

If your laser is a grip laser and mounted on the grip of the weapon than please choose “YES” and specify your make and model of your laser.

ECR Instant On Viridian Lasers

Enhanced Combat Readiness (ECR) now part of every universal Viridian laser. This can only be used with the Viridian C Series, X Series Gen 2 and Gen 3, and Reactor Series are equipped with INSTANT-ON technology and activate. Please see FAQ page and our BLOG page for more info. Will not work on E-series.

Shooting Hand

Color * 

Stitching Color

Wanna spice up your holster a little, or have a different holster than anyone else? Make the holster unique and custom by adding some color stitching to the front of the holster only. Each color is made with heavy duty nylon thread, to resist easy tearing or dry rot damage. (Color Thread $15.99-Black Free) The option that you choose will be shown at the very bottom before you add to cart.

Stitching

Double stitching is a second line of stitching. This will aid in better retention and long term use of the holster. (extra $15.99)

Internal Liner

When we craft a holster we use the smooth bull hide leather on the outside and the ruffer portion on the inside. When someone adds a liner we add a second layer of thinner bullhide leather and use the smooth side inside the holster with the two ruff sides against each other. This process is to enable is a smooth drawing of the weapon, instead of suede having some friction when drawing. Secondly, suede tends to not mold as easy on the inside as the bullhide, enabling less retention. The bullhide leather molds with great detail and definition in the leather. The bullhide leather is not as thick as the suede causing better concealment of the holster when wearing.

Holster End

The holster end means that the barrel of your weapon will be cover, but you have the option to having the holster end sewn at the bottom or leaving it open. This is a preference of choice. Leaving the holster end open is good for target shooting. This will allow for debris to exit the barrel of the weapon after shooting a lot. Flip side, if carry the weapon in a pouch or outdoors (riding a horse, bike, hunting, etc.), one may want to enclose the bottom. So debris will not enter the barrel of the weapon. (Please see FAQ page for more information).

Exotic Leather

Choosing exotic leather will increase the strength and durability of the holster. . The exotic leathers listed below is some of the strongest leathers available! The texture is much more defined than the others leathers. Exotic leather is a dense material that helps resist moisture and scratch proof. Well worth every penny! Learn more about the function, texture and colors on our FAQ & BLOG page. One of our most expensive leathers available is alligator, please call for prices and colors available.

Share:
SKU: B-6-1 Categories: , Tag:

Front Pocket Holster (B-7) is a very simple yet effective holster for carry of small .380, 9mm and a small snub nose .38/.357. The front pocket design is small sleeve that encases the barrel and trigger guard of the weapon. Allowing easy access to the weapon.

The front pocket holster keeps the weapon upright in the pocket. To access the gun easier and prevent the gun from moving around. While keeping the holster and weapon comfortable in the pocket for long term carry!

This is also, a great choice for cargo pocket, jacket pocket, purse pocket, vehicle pocket or bedside.

 

Weight 1 lbs
Color

, , , ,

Stitching Color

, , , , , , ,

Holster End

, ,

Exotic Leather

, , , , ,

Stitching

, ,

7 reviews for Front Pocket Holster (B-7)

Customer Images

Image #1 from me
Image #2 from me
Image #3 from me
Image #1 from me

me

Expensive! But worth it! Very well made with concise instructions on fitting it (if too tight) and maintaining the look and feel of the leather. Excellent quality, works great in the pocket. Using it with a Ruger LCP II with green laser. I recommend this product.

Image #2 from me

me

Expensive! But worth it! Very well made with concise instructions on fitting it (if too tight) and maintaining the look and feel of the leather. Excellent quality, works great in the pocket. Using it with a Ruger LCP II with green laser. I recommend this product.

Image #3 from me

me

Expensive! But worth it! Very well made with concise instructions on fitting it (if too tight) and maintaining the look and feel of the leather. Excellent quality, works great in the pocket. Using it with a Ruger LCP II with green laser. I recommend this product.

Image #1 from me
Image #2 from me
Image #3 from me

  1. troy kerley (verified owner) –

    The first holster I ordered was a crossdraw holster which was constructed with excellent workmanship and the highest regard for excellents. I received Much earlyer than promised. The fit on me is perfect and comfortable. So why on earth wouldn’t I order a second one when the need arose from the same professional company? I did order a pocket holster for the Glock 26 baby as its called. I also received it earlier than promised with the same high quality in this product as well. Needless to say it also is very comfortable and I am more than pleased. M.T.R has all of my buisness in the future when the need arises. If you are looking for the highest quality and the highest workmanship in the buisness these people can be trusted. I tell everyone I meet and every buisness I deal with to trye them. When you do you won’t be disappointed. Give these wonderful workers a chance. You wont regret it.
    Thank you
    Troy Kerley

  2. ANDY FOX (verified owner) –

    Very nice

  3. Anonymous (verified owner) –

    excellent workmanship, fits nicely to the gun and laser.

  4. Shayn Ray (verified owner) –

    Beautiful well fitting, worth the wait, cant go wrong with stingray!

  5. Anonymous (verified owner) –

    I like the holster, only issue is the the tab that hooks on the pocket is too long or wide?, (from the back of the holster to the end of the tab) it will not let the holster sit all the way down into the pocket. is you remove the MT and leave the R in MTR it would work much better. Otherwise it is a good holster – excellent workmanship! I should probably have this one remade with the tap ‘shorter’.

Add a review

Cancel

Related Products

Scroll to top