TOP RATED POCKET HOLSTER AVAILABLE
No more carrying your weapon inside of your pocket without a holster. Take precaution and holster your weapon inside your pocket. There have shown studies of several accidents of weapons going on in pockets or while drawing due to no holster. MTR Custom Leather has your back and want you to be safe!
MTR Custom Leather offers the Best and most Functional Back Pocket Holster (B-6).
Features:
- Full coverage of the weapon
- All leather back pad with suede
- Trigger is covered
- Heavy duty nylon stitching
- Great concealment and retention
The back pocket holster has a full leather back pad that goes to the outside of the back pocket so printing of the gun is not seen. Therefore, concealing the holster and weapon is the best of any other pocket holster available. The retention of the back pad sticking inside of the pocket while drawing is amazing, due to the suede lining on the back pad. The suede leather on the back pad catches onto the cotton lining of the pocket. The holster part and the back pad is attached with 2 Chicago screws, this enables for easy on and off of the holster. The holster can be worn in the front pocket by taking the back pad off. The holster is also hinged on the back pad for easy access to the fire arm, this will enable for a full grip on the weapon. This is a great choice for carrying your weapon in the cargo pocket, jacket pocket, purse pocket, vehicle pocket or bedside.
NOTE: DUE TO THE FACT THAT OUR GEAR IS ADJUSTABLE THREAD LOCKER IS NOT APPLIED DURING THE PRODUCTION PHASE. PLEASE ARRANGE YOUR GEAR HOWEVER YOU AND YOUR APPLICATION DESIRE AND APPLY A BLUE THREAD LOCKER TO YOUR HARDWARE. LOST HARDWARE WILL BE REPLACED AT THE CUSTOMERS EXPENSE.
Ken (verified owner) –
Just what I was looking for and well made. It holds the gun safe and secure in my pocket. While they indicate it is designed for the back pocket, I wanted it for my front pants pocket. It works well there. The holster consists of 2 parts, the part that wraps (front and back) around the barrel and trigger guard, and the rectangular backer that helps hold the holster in place in your pocket. The two parts are held together with a pair of “chicago” screws. The backer portion on mine had two sets of holes (total of 4 holes), so the holster was essentially ambidextrous, depending which set of holes you use. That also enables you to configure it so that the backer is either outermost when in the pocket so as to prevent printing, or innermost for ease of access in the front pocket. I wanted it for a Galesi .25 acp (Model 503 a/k/a Model 9, a/k/a Vest Pocket). That was not among the choices offered by MTR, but they had one for the Seacamp LWS 32, which is extremely close in dimension with the Galesi. After corresponding with MTR, I ordered it. It fits the Galesi perfectly. Check the dimensions, but it may well fit other “mouse guns” such as the Baby Browning and various clones.
Kenneth (verified owner) –
It was just what I wanted, and well made. I was looking for a pocket holster for use in a right, front pants pocket to carry a .25 acp semi-automatic. Although they did not have one for my specific gun, the one for the Seacamp 32 was so close in gun dimensions that I got it. Great fit. This small pocket holster is likely to fit most small .25 acp (Galesi, Baby Browning, etc) but check the dimensions. The back piece (rectangular part) came with 2 sets of holes so it could be assembled with butt pointing to either side (left or right). Just MTR know, and they can help.
Greg (verified owner) –
This is my 2nd pocket holster from MTR, very good, usable design.
I’m plain clothes police. Carry it every time I go outside with pants on…EVERY day people.
Marty G. (verified owner) –
Just a little bit large. Difficult to get into pocket. Otherwise, great holster.
Neil C. (verified owner) –
FIts the gun well; challenging to get into a pocket (but is very secure in the pocket). If it was even 1/8′ narrower – even better, maybe 3/8 in narrower at the bottom and 1/8 narrower at the top – that would work better. Still, I’ll use it.
Scott (verified owner) –
I wanted a holster for back pocket carry, and this one is perfect for the job. Also like the flexibility of being able to remove the flap which makes it easier to carry in a front pocket when it’s more suitable to do so.
james bondurant (verified owner) –
Product wise the holster is great, I do wish the back was more rigid like the belt I bought from you. Contact wise I started on and off since last Christmas trying to get in touch with someone to place my order leaving messages both with people and machines never to receive a call back. Finally got some one to respond to my second emails and got it ordered. Thanks
JOHN (verified owner) –
Anonymous (verified owner) –
Ordering process was simple, completion and delivery was timely, fit and finish is excellent.
Adam (verified owner) –
This is not of the ‘standard’ holsters. Nor is the gun I ordered it for Sig 365 SAS.
The holster came reasonably quick.
The adjustment for the CT laser was done perfectly.
The job was to be able to carry the small gun in regular jeans (no printing) and to be able to put a hand on the gun without alarming anyone.
The holster does it perfectly.
After a day or two I barely remember I have it in my pocket.
This not the first holster I purchased for this gun for pocket carry, but it is the last.
Solid, quality work, thank you.
Richard E. (verified owner) –
Excellent quality and fit, only took a couple days to break in. This is not my first mtr and it will not be my last.
RONALD C. (verified owner) –
Overall an excellent job. Not given 5 stars ONLY because I noticed that it would fit my pocket better if only it had rounded corners at the TOP. Otherwise, the squared top corners are prominently showing through the exterior of the pants pocket. (Not a huge deal, but I use this holster as a right-side pocket holster instead of a rear pocket one). I also like the quality of build for the price paid!